NEC SV9100 - Exiting the InUC Web Client; Handling Exit Warning Messages

NEC SV9100 Communication System
Quick Install Guide – UNIVERGE ST500 Mobile Client v1.0 31
Exit the Profile configuration settings and the UNIVERGE ST500 Mobile Client will attempt to register to the
SV9100. If the client fails to connect re-check your configuration settings and try again.
You should now be ready to use your UNIVERGE ST500 mobile client.
Please refer to the UNIVERGE ST500 for iOS – Operation Manual or UNIVERGE ST500 for iOS – Quick
Reference Guide for further information on how to operate your client.