NEC SV9100 - What is InUC?; Buddy List; Call Control; Call History

For additional information search for “NEC Sv9100 Multi-Line Terminal User Guide” in your web browser
PAGING
Allows a user to page all digital handsets.
• Lift the handset and dial *10
PROGRAMMING ONE-TOUCH
KEYS
To program an extension or an external number
into a vacant function key
• Press the Speaker key and dial 751
• Press an available Function key
• Dial the One-Touch service code 01
• Enter either an extension number or
external number, including 0 for an outside
line
• Press Hold to store
Service Code 00 will erase data from function
key
EXTENSION NAME
To edit the displayed extension name of any
extension
• Press the Speaker key and dial 700
• Enter the number of the extension to
change
• Enter the name using the dial pad
• Press Hold to store
Note: To move the cursor right press # ,
to move the cursor left press
Feature
RINGTONES
The DT series handset has 8 different ring tones
you can select
• Press the Speaker key and dial 720
• Dial 1 to set Internal ring or
Dial 2 to set External ring
• Enter (1-8) for desired ring pattern
KEY PAD TONES
To activate key pad tones
• Press the Speaker key and dial 724 to turn
On/Off
LCD
To adjust the display contrast
• Press the Cursor key up or down while the
phone is idle
SPEAKER/RECEIVER VOLUME
To adjust the speaker/receiver volume
• Press the Cursor key up or down during a
phone conversation
RINGER VOLUME
To adjust the ringer volume
• Press the Cursor key up or down while the
phone is ringing
CLOCK
To change the time displayed on all handsets
• Lift the handset and dial 728
• Enter the time in 24hr format (e.g. 9am –
0900)
• Confirmation tone will be heard after
entering the digits, then replace the handset