2 Connect the supplied power cord to the AC IN of the projector and the wall
outlet.
The projector is in the standby condition.
TIP:
• When Virtual Remote Tool starts for the rst time, “Easy Setup”
window will be displayed to navigate your connections.
Step 3: Start Virtual Remote Tool
Start using the shortcut icon
Start from the Start menu
Click [Start] -> [All Programs] or [Programs] -> [NEC Projector
User Supportware] -> [Virtual Remote Tool] -> [Virtual Remote
Tool].
When Virtual Remote Tool starts for the rst time, “Easy Setup”
window will be displayed.
Follow the instructions on the screens.
When “Easy Setup” is completed, the Virtual Remote Tool screen
will be displayed.
When [POWER-
SAVING] is se-
lected for [STANDBY
MODE] from the
menu, the projector
cannot be turned on
via the computer cable
(VGA) or network
(wired LAN) connec-
tion.
To Next Page
Loading...
