To Next Page
R
Raymond HallAug 8, 2025
What to do if the NEC UM330X Projector lamp has reached its end of life?
- Eelizabeth65Aug 8, 2025
If the lamp in your NEC Projector has reached its end of life, you should replace the lamp.
What to do if the NEC UM330X Projector lamp has reached its end of life?
If the lamp in your NEC Projector has reached its end of life, you should replace the lamp.
What to do if the NEC UM330X lamp has been used beyond its limit?
If the lamp in your NEC Projector has been used beyond its limit, you should replace the lamp.
What to do if the NEC UM330X shows a lamp error?
If your NEC Projector shows a lamp error, and the lamp fails to light, wait a full minute and then try turning it on again.
What to do if the NEC UM330X Projector shows a lamp cover error or lamp housing error?
If your NEC Projector displays a lamp cover error or a lamp housing error, replace the lamp cover or lamp housing correctly. If the issue persists, contact your dealer.
What to do if there is a network conflict on my NEC UM330X?
If your NEC Projector shows a network conflict, it might be because both the built-in wired LAN and the wireless LAN are connected to the same network simultaneously. To resolve this, connect them to different networks if you intend to use both.
What to do if my NEC Projector shows a temperature error?
If your NEC Projector is showing a temperature error, it indicates that the projector is overheated. Try moving the projector to a cooler location.
General| Brightness | 3300 lumens |
|---|---|
| Lamp Life (Normal) | 5000 hours |
| Throw Ratio | 0.48:1 |
| Native Resolution | XGA (1024 x 768) |
| Projection Technology | 3LCD |
| Resolution | 1024 x 768 (XGA) |
| Input Ports | HDMI, VGA, USB |
| Projection Size | 30 - 300 inches |
| Input Connectors | HDMI, VGA, Composite Video, S-Video, USB |
