NEC UM330X - Connecting HDMI Input

111
6. Installation and Connections
Connecting HDMI Input
YoucanconnecttheHDMIoutputofyourDVDplayer,harddiskplayer,Blu-rayplayer,ornotebooktypePCtothe
HDMIINconnectorofyourprojector.
NOTE:TheHDMIINconnectorsupportsPlug&Play(DDC2B).
Inputconnector
SOURCEbuttonontheprojector
cabinet
Buttonontheremotecontrol
HDMI1IN HDMI1 (HDMI*)
HDMI2IN HDMI2 (HDMI*)
* TheHDMIbuttonontheremotecontrolwilltogglebetween“HDMI1andHDMI2”.Upontherstbuttonpushthe
projectorwillalwaysswitchtoHDMI1IN.AsecondbuttonpushwillthenswitchtoHDMI2IN.ifthereisonlyone
HDMIsourceconnectedtotheprojectoritisrecommendedtoplacethatsignalontheHDMI1INconnector.
TIP:ForusersofaudiovideoequipmentwithanHDMIconnector:
Select“Enhanced”ratherthan“Normal”ifHDMIoutputisswitchablebetween“Enhanced”and“Normal”.
Thiswillprovideimprovedimagecontrastandmoredetaileddarkareas.
Formoreinformationonsettings,refertotheinstructionmanualoftheaudiovideoequipmenttobeconnected.
• WhenconnectingtheHDMIINconnectoroftheprojectortotheDVDplayer,theprojector’svideolevelcanbe
madesettingsinaccordancewiththeDVDplayer’svideolevel.Inthemenuselect[HDMISETTINGS]→[VIDEO
LEVEL]andmakenecessarysettings.
• IftheHDMIinputsoundcannotbeheard,inthemenuselect[HDMISETTINGS]→[HDMI1]or[HDMI2]→[AUDIO
SELECT]→[HDMI1]or[HDMI2].(→page93)
HDMIcable(notsupplied)
UseHighSpeedHDMI
®
Cable.
Audio cable (not supplied)