To Next Page

To Previous Page

5. Using On-Screen Menu

SelectingSignalFormat[SIGNALSELECT]

[COMPUTER]

Allowsyoutochoose[COMPUTER]foranRGBsourcesuchasacomputer,or[COMPONENT]foracomponent

videosourcesuchasaDVDplayer.Normallyselect[RGB/COMPONENT]andtheprojectorautomaticallydetectsa

componentsignal.Howevertheremaybesomecomponentsignalsthattheprojectorisunabletodetect.Ifthisisthe

case,select[COMPONENT].

[VIDEO&S-VIDEOSystemSelect]

Thisfeatureenablesyoutoselectcompositevideostandardsautomaticallyormanually.

Normallyselect[AUTO]andtheprojectorwillautomaticallydetectthevideostandard.

Inthecasewheretheprojectorhasdifcultydetectingthevideostandard,selecttheappropriatevideostandardfrom

the menu.

ThismustbedoneforVIDEOandS-VIDEOrespectively.

EnablingorDisablingWXGAMode[WXGAMODE]

Selecting[ON]willgiveprioritytoWXGA(1280×768)/WUXGA(1920×1200)signalsinrecognizinganinputsig-

nal.

When[WXGAMODE]issetto[ON],XGA(1024×768)/UXGA(1600×1200)signalsmaynotberecognizedon

UM330X/UM280X.Inthiscase,select[OFF].

NOTE:

• The[OFF]isselectedatthetimeofshipmentofUM330X/UM280X.

• The[ON]isselectedatthetimeofshipmentofUM330W/UM280W.

Enablingthedeinterlace[DEINTERLACE]

Turnsonoroffthedeinterlacefunctionforatelecinesignal.

OFF �� Select this option if there is any jitter or artifacts in video�

ON �� Default standard setting�

NOTE:ThisfeatureisnotavailableforHDTV(progressive)andcomputersignals.

SettingHDMI1/2[HDMISETTINGS]

MakethesettingsforeachvideolevelandaudiolevelwhenconnectingHDMIequipmentsuchasaDVDplayer.

VIDEO LEVEL �� Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NOR-

MAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image

contrast and increase detail in the dark areas�

AUDIO SELECT �� Select [HDMI1] or [HDMI2] to switch the HDMI 1 or HDMI 2 IN digital audio signal and select [COMPUTER]

to switch the COMPUTER input audio signal�

EnablingKeySoundandErrorSound[BEEP]

Thisfeatureturnsonoroffthebuttonsoundoralarmwhenanerroroccursorthefollowingoperationsareper-

formed.

-Displayingthemainmenu

-Switchingsources

-Resettingdatabyusing[RESET]

-PressingPOWERONorPOWEROFFbutton

NEC UM330X User Manual

Other manuals for NEC UM330X