NEC U250X Installation And Adjustment Manual

ENG-1
Wall Mount Unit
NP01WK/NP01WK1 Installation and Adjustment Manual
Thank you for your purchase of this NEC wall mount unit.
Please read this installation and adjustment manual carefully to ensure proper use.
The Wall Mount Unit NP01WK/NP01WK1 is exclusively for Projector U300X/U250X/
U310W/U260W and cannot be used for other projectors.
Special skills are required to install the projector. This work
should never be performed by the customer.
To the Dealer and Installer
To ensure customer safety, we ask that the installation work
be started after careful attention is paid to the strength of the
mounting location to ensure it will withstand the weight of the
projector and mounting hardware.
CONTENTS
Please heed the following ...................................................ENG-2
Preparation .........................................................................ENG-4
Packaged Parts ........................................................ENG-4
Names of Parts .........................................................ENG-5
Dimensions of Parts ..................................................ENG-6
Mounting the Projector .......................................................ENG-7
Adjusting the Projection Position .......................................ENG-12
Specifications ...................................................................ENG-16
Using the wall plate ..........................................................ENG-16

NEC U250X Specifications

General

Brightness	2500 ANSI Lumens
Resolution	1024 x 768 (XGA)
Contrast Ratio	2000:1
Lamp Life (Normal)	3000 hours
Lamp Life (Eco)	4000 hours
Display Technology	DLP
Outputs	VGA
Projection Size	30 - 300 inches
Inputs	VGA, HDMI, Composite, S-Video
Speakers	10W