NEC U250X - Specifications; Using the Wall Plate

ENG-16
Specifications
Product name: Wall mount unit
Model: NP01WK/NP01WK1
Adjustmentangle: Up-downangle±3°,left-rightangle±3°,inclinationangle±10°
Adjustmentwidth: Front-rear±100mm,left-right±50mm,up-down±50mm
External dimensions: 280 (W) x 541(D) x 219 (H) mm
Weight: Approx. 6.2kg
•Specicationsanddesignaresubjecttochangewithoutnotice.
Using the wall plate
(NP01WK1 only)
The NP01WK1 is distributed in North America only.
Screw position dimensional drawing (unit: mm)
a
Mount the supplied wall plate to the vertical frame of the wall.
b
Securely fasten the wall adapter to the wall plate using the four supplied screws. Be sure to
observe all precautions listed on page ENG-8.
404
202
140
90
55
160
Wall adapter fixation screw hole
4, dia. 5
Wall fixation screw hole
12, dia. 7
Cable pass-through hole
a
b