NEC UNIVERGE SV8500 Reference Sheet

12
/
24/32 Button
DESI Less 8 Button
Menu
From this key, the user may access additional
functions such as Call History and Directory.
Soft Keys
Any feature shown at the bottom of the LCD is
available. The appropriate feature key is
displayed on the screen according to the call
handling process.
Programmable keys
These keys can be programmed as either
Flexible Line key, Programmable Feature key o
r
One-Touch Speed Dial key.
Cursor
Recall
Press this key to terminate current call and re-
seize dial tone.
Feature
Used to activate terminal setup functions and to
program One-Touch keys.
Feature + 1
–
Turns Microphone On/Off.
Feature + 3 – Selects ring tone (Repeat’3’ to
select a different tone) (non-IP terminal)
Feature + 7
–
Indicator On/Off. Controls if lamp
flashes when ringing.
Feature + 8 – Direct/Preset dial pad On/Off.
Direct will automatically go off-hook when
number is dialed. Preset will allow the number to
be dialed before going off hook
φ
Lift Handset or Press Speaker.
φ
Dial the Required Number.
(For external calls, dial ‘0‘ first
)
φ
Without lifting handset, press REDIAL
button.
φ
Press the Cursor key left/right to search
the required number.
φ
Press
* to initiate call.
Ask Caller to Please Hold:
φ
Press
HOLD key – held key flashes.
φ
You may replace handset if you wish.
To Retrieve Call
φ
Lift handset.
φ
Press flashing Line
NOTE:
For exclusive hold
–
press HOLD twice
With a call in progress:
φ
Press
TRANSFER key.
φ
Dial extension or external number and
announce the call (optional).
φ
Replace handset.
NOTE:
If the called extension, is busy or does not
answer, press TRANSFER
to return to your caller.
If the extension does not accept the call, ask them
to hang up and your call is returned.
With a call in progress (internal or external)
φ
Press
TRANSFER Key.
φ
Dial internal or external number.
φ
When the third party answers, press
CONF Soft key.
φ
A three way conference is now
established.
NOTE:
Any party may exit the Conference by hanging
up. The 2 parties will remain connected, as
long as one of the remaining parties is internal.
Allows users to toggle between calls.
φ
Press
TRANSFER key (this puts
the first call on hold and provides
you with dial tone to call the 2
nd
party).
φ
Dial required 2
nd
number.
φ
Press
TRANSFER key each time
you wish to toggle between the
parties.
φ
When finished with one party,
hang up on them and the
telephone will ring and connect
you to the other party.
12/24/32 Button Digital & IP
DESI Less 8 Button Digital & IP
Reference Sheet
LAST NUMBER REDIAL
MAKE A CALL
HOLD
TRANSFER
CONFERENCE
FUNCTION KEYS
SWAP CALL
Answer
When the LED on this key is flashing, press the
key to answer a waiting call.
Hold
Press this key to put a call on hold
Transfer
Allows the extension user to transfer a call or
make a second call.
Speaker
Controls built-in speaker, which can be used for
Hands Free Dialling/Monitoring. LED on key
lights when key is active.
Help
Explanations of the Soft keys can be called up
on the LCD by pressing this key.
Exit
The user can exit from the Menu or Help mode
by pressing this key.
Note: Feature 7 & 8 are not functional on a
SV8300.

NEC UNIVERGE SV8500 Specifications

General

Brand	NEC
Model	UNIVERGE SV8500
Category	Server
Language	English