NEC UNIVERGE SV8500 - Page 2

If you dial a busy extension.
φ
Press
CALL BAC
K (CB) soft Key
or dial Access code____.
φ
Replace Handset.
During this time you may make and receive
calls.
φ
When both extens
ions are free,
your phone will ring
φ
Lift handset or p
r
ess Speaker
and the other extension will ring.
To Cancel
φ
Lift handset and
press CAL
L
BACK (CB)
soft key or dial
Access code_____.
Forwards all calls immediately.
To Set
φ
Lift Handset and
press FDA
Key
or Dial Access code_____
φ
Dial destination number.
φ
Replace
Handset.
To Ca
ncel
φ
Lift handset and
press FD
A key
,
or dial Access Code _____.
Forwards calls only after 4 – 6 rings.
To Set
φ
Lift Handset and press FDN Key
or Dial Access code______
__.
φ
Dial destination number.
φ
Replace
Handset.
To Ca
ncel
φ
Lift handset and press FDN key,
or dial Access C
ode _______.
Forwards calls when your extension is busy.
To Set
φ
Lift Handset and press FDB Key o
r
Dial Access code_____
φ
Dial destination number.
φ
Replace
Handset.
To Ca
ncel
φ
Lift handset and press FDB key, or dial
Access Code _____.
For IP Phon
es only.
To Login
φ
Enter Login code
and press SET
Soft
key.
φ
Enter password and press OK So
ft
key.
To Logout
φ
Pr
ess
L
OGOUT key.
(Display will show
LOGOUT?)
φ
Press
L
OGOUT
key again and wait a
few seconds for handset to logout.
To answer a ringing extension in your group :
φ
Lift handset and
press PICK Soft
key
or dial Access Code______.
For answering ringing extensions not in your
group:
φ
Lift handset, dial Access Code ______
plus ringing extension number.
Allows a user to intercom othe
r Di
gital handsets.
φ
Lift handset and dial extension number.
φ
Press
VO
ICE Soft key and speak over the
intercom.
To Store Numbers using One-Touch Keys:
φ
Press
Feature
button.
φ
Press an available One-Touc
h
Speed Calling key.
φ
Enter either extension number or
external number
including ‘0’ for an
outside line.
φ
Pr
ess
Feature
button.
To Access
φ
Press desired
One
-
Touch Speed
Calling key or press Speaker and
One-Touch Speed Calling key to call
number.
To adjust the Display:
Press the Cursor button up or down while the
phone is idle.
To adjust the Speaker/Receiver Volume:
Press the Cursor button up or down during
conversation
To adjust the Ringing Volume:
Press the Cursor button up or down during
ringing.
The user can access the shortcut menu by
pressing the Enter key (Center Cursor button).
To set the Voice Mail number in the
Shortcut Menu:
φ
From the idle display, (Do not lift
handset).
φ
Press
the
FEATURE butto
n.
φ
Press the
Enter key.
φ
Enter the Voice Mail pilot number.
φ
Press
FEATURE butto
n to save.
To use:
φ
Do not lift handset.
φ
Press
the
Enter key.
φ
Select either Missed Calls to see the
missed calls menu
, or Voice Mail to
dial the voice mail pilot.
RINGER VOLUME
CALLBACK
CALL FORWARD – ALL*
CALL FORWARD BUSY*
CALL FORWARD NO ANSWER
*
LOGIN/LOGOUT
CALL PICK UP
VOICECALL
PROGRAMMING SPEED
NUMBERS
DISPLAY
SPEAKER/RECEIVER VOLUME
RINGER VOLUME
SHORTCUT MENU
* On SV8300 press the * key and
receive service set tone.
NDA-31131
Issue 1.0