Issue No. 1.0 UM8000
13 - 6 Database Migration
5. Type cd\ <ENTER>.
6. Type setup <ENTER>.
7. Type y to proceed with the voice messaging system
set up utility.
8. On the
Choose Setup Type menu, type 2 to select
Configure System, then <ENTER>.
9. Press OK to confirm that the voice messaging
system is installed on drive E:.
10. Press OK to confirm that the voice messaging
system is installed in the
E:\VMAIL\ directory.
11. The Setup menu displays the features and options
available on the system. Review the available
options, then <ENTER>.
12. The Update Configuration menu appears. Click
Configure Network Protocols (for Network Backup/
Restore)
<ENTER>.
Make sure that all other options are cleared, then
<ENTER>.
13. From the Select Network Protocols to Install/
Configure menu, type 2 (TCP/IP) and 3 (NetBIOS
over TCP/IP), then <ENTER>.
The TCP/IP Setup menu appears.
14. Type 1<ENTER>
15. Type the correct value for the TCP/IP Address field,
then <ENTER>.
16. Type 2 <ENTER>.
17. Type the correct value for the Subnet Mask field, then
<ENTER>.
18. Type 3 <ENTER>.
19. Type the correct value for the Default Router field,
then <ENTER>.
20. Type 4 then <ENTER>.
21. Type the correct value for the Domain field, then
<ENTER>
To Next Page
Loading...
