NEC Univerge UM8000 - Changing Administrator Password and Creating a New User; Changing the Password; Creating a New User

Issue No. 1.0 UM8000
9 - 14 Configuring UM8000
5.4 Changing Administrator Password and Creating a New User
5.4.1 Changing the Password
To change admin password, use the following procedure.
1. Start PuTTY.
2. Log in as
Admin <ENTER>.
3. On the Main menu, choose
2-Maintenance, then press <ENTER>.
The Maintenance page appears.
4. On the Maintenance menu, choose
2-Set admin password, then
press
<ENTER>.
The Set admin password page appears.
5. Type the new password, then press
<ENTER>.
6. Retype the new password., then press
<ENTER>.
An alert message appears stating that the password has been
changed.
7. Click OK or press <ENTER> to return to the Maintenance menu.
8. On the Maintenance menu, choose
0-Return to previous menu, then
press
<ENTER> to return to the Main menu.
5.4.2 Creating a New User
To create a new system manager for the voice messaging system,
perform the following procedure:
1. Start the Web administration console.
2. Under
Subscribers, click Subscribers.
The Subscriber profile page appears.
3. Click the
Add icon to create a new subscriber.
The Add subscriber page appears.
4. Make sure that the
New subscriber check box is checked.
5. Click
Add.
The Add subscriber page resets. Close the page.
6. On the Subscriber profile page, choose the
Enable subscriber as
system manager
check box.
7. Click the
Save icon.
8. The new subscriber now has system manager permissions.