Issue No. 1.0 UM8000
10 - 6 E-mail Integration
5. Construct the notification template as needed. The tags below can be
used to insert information that the voice mail system dynamically
determines for each message.
6. Click the Save icon.
7. Click Preview.
The voice messaging system e-mail configuration is complete.
Next step…
◆ Configure subscriber template e-mail settings. Refer to Section 6.1 Setting
Up the Default Subscriber Template on page 10-7 in this chapter.
● [senderName] ● Sender's name
● [senderPhone] ● Sender's phone
● [senderAccount] ● Sender's account (only available if
configured in subscriber transfer/
screening options)
● [messageTimestamp] ● Message received timestamp on
the messaging system
● [messageDuration] ● Message length in seconds
● [messageSize] ● Message size in kilobytes
● [messageFlag] ● Message Special flags. Available
message flags: PRIVATE and
URGENT
● [voicemailURL] ● URL of the messaging system
● [subscriberName] ● Subscriber's name
● [subscriberExtension] ● Subscriber's extension
● [notificationType] ● Message notification type. Available
notification types: voice, fax,
message copy, forwarded voice,
forwarded fax, forwarded fax with
voice, reply fax, reply voice and IM
To Next Page
Loading...
