57
Robson Factory Settings
Your notebook may be equipped with Intel
®
Turbo Memory technology which supports both
Windows
®
ReadyBoost
™
and Windows
®
ReadyDrive
™
.
Please take note that these features need to be enabled to function.
Please refer to the following steps:
1. Click Start
, go to All Programs.
2. Click on Intel Turbo Memory, then Intel Turbo Memory Console.
If you are prompted for an administrator password or confirmation, type the password or
click Continue.
3. Note the Intel Turbo Memory Console window has both Windows
®
ReadyBoost
™
and
Windows
®
ReadyDrive
™
enabled. If not, please check the enable box accordingly. You will
be prompted to restart the notebook.
4. After your notebook restarts, Intel
®
Turbo Memory will be functional.
You will enhance your notebook performance and ensure certain applications to perform
properly such as MDVDCreator by enabling Intel
®
Turbo Memory.
After performing notebook recovery (using F8 or MDVD), you might notice additional drive
labelled as “NVCACHE”. Please use the Intel Turbo Memory Console to disable Windows
®
ReadyBoost
™
. After reboot, please enable back Windows
®
ReadyBoost
™
. This will refresh
the Intel
®
Turbo Memory.
The software varies according to the model and is subject to change without notice (for specific
models only).
To Next Page
Loading...
