System Configuration and Setup 2-25
Press any key to return to the Main menu.
5. Highlight the “Install New BIOS” option and press Enter.
6. Press Y and then press Enter. After a brief pause, a message appears telling
you to remove the diskette in drive A.
7. Remove the diskette and press any key to continue. The utility updates the
BIOS.
Power off your computer. The next time you power on your computer, you
will have the latest Versa SX computer BIOS revision level.
8. Enter Setup at Start up by pressing F1 at power on to restore the default
parameter settings.
To Next Page
Loading...
