To Next PageTo Next Page
Need help?Do you have a question about the NEC VT491 and is the answer not in the manual?
General| Projection distance | 0.7 - 11.1 m |
|---|---|
| Vertical scan range | 50 - 120 Hz |
| Horizontal scan range | 15 - 100 kHz |
| Projection technology | LCD |
| Contrast ratio (typical) | 600:1 |
| Screen size compatibility | - \ |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | ±30 ° |
| Lamp power | 190 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| I/O ports | Mini D.SUB 15-pin x 3, Phono jack, mini DIN 4-pin, mini DIN 8-pin. |
| Aspect ratio | - |
| Dimensions (WxDxH) | 309 x 258 x 112 mm |
| Power requirements | 100-240V AC/50-60Hz |
| Microphone in | Yes |
| Headphone outputs | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | 29 dB |
| Remote control type | RS-232 |
| Safety | CE, TÜV GS |
| Power consumption (standby) | 9 W |
| Power consumption (typical) | 255 W |
| Focal length range | - mm |
| Ethernet LAN | No |
Weight and Dimensions| Weight | 2900 g |
|---|
