What to do if NEC Projector shows lamp cover error?
If your NEC Projector displays a lamp cover error, try the following: Ensure the lamp cover or lamp housing is correctly replaced. If the issue persists, move the projector to a cooler area. Allow the projector to sit for a minute before attempting to power it on again. Also, you may have pressed the cabinet button when it is locked. If none of these steps work, consider replacing the lamp.
General| Display diagonal | 0.6 \ |
|---|---|
| Vertical scan range | 50 - 120 Hz |
| Horizontal scan range | 15 - 100 kHz |
| Projector native resolution | XGA (1024x768) |
| Output | Mini D-SUB, 15-pin |
| Video in | Phono jack |
| I/O ports | 1 x Mini D-SUB, 15-pin; DIN 4-pin; D-SUB 8-pin |
| Audio input | 1 x 3.5 stereo mini jack, 1 x stereo phono jack |
| Dimensions (WxDxH) | 112 x 258 x 309 mm |
| Power requirements | 100 - 120/200 - 240 V AC/50 - 60 Hz |
| Connectivity technology | Wireless |
| Lamp power | 150 W |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Number of built-in speakers | 1 |
| Power consumption (standby) | 7.4 W |
| Power consumption (typical) | 215 W |
General safety guidelines and warnings, including compliance notices.
Guidelines for safely installing the projector, covering location and conditions.
Warnings related to electrical hazards, heat, and potential fire risks.
Lists all items included with the projector for setup.
Overview of the projector's features, capabilities, and benefits.
Identifies physical components of the projector's front, rear, and bottom.
Guidance on projector placement and screen setup for optimal viewing.
Instructions for connecting various video and audio devices to the projector.
Steps for connecting the projector to a power source.
Step-by-step guide to power on the projector and prepare for use.
How to choose the correct input signal for display.
Methods for scaling the image and positioning it on the screen.
How to fix geometric distortion to make the image rectangular.
Options for adjusting lamp brightness and extending lamp life.
Security feature setup and operation to protect against unauthorized use.
Functionality for controlling a PC mouse using the projector's remote.
Navigating the projector's on-screen interface and adjusting settings.
Detailed explanation of the 'Picture' menu settings.
Instructions on how to restore factory default settings.
Procedures for cleaning and replacing the projector's air filters.
Step-by-step guide for safely replacing the projector lamp.
Guide to resolving common projector issues and error messages.
Technical details, performance data, and compatibility information.
Overview of international service options and coverage.
Details regarding warranty coverage, conditions, and exclusions.
To Next Page
