Need help?Do you have a question about the NEC VT800 and is the answer not in the manual?
General| Projection distance | 11 m |
|---|---|
| Projection technology | LCD |
| Contrast ratio (typical) | 500:1 |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | -30 - 30 ° |
| Keystone correction, horizontal | -40 - 40 ° |
| Resolution | 1920 x 1080 pixels |
| Audio input | 2 |
| Dimensions (WxDxH) | 310 x 125 x 289 mm |
| Power requirements | 100 - 240 V AC, 50 - 60 Hz |
| Connectivity technology | Wired |
| Lamp power | 210 W |
| Light source type | Lamp |
| Service life of light source | 2500 h |
| Service life of light source (economic mode) | 3500 h |
| Focal length range | 18.9 - 22.7 mm |
| Analog signal format system | NTSC, NTSC 4.43, PAL, SECAM |
| RMS rated power | 5 W |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 3 |
| Certification | CE, TÜV GS, RoHS |
| Plug and Play | Yes |
| Power consumption (standby) | 18 W |
| Power consumption (typical) | 310 W |
Weight and Dimensions| Weight | 3700 g |
|---|
Covers warnings, cautions, and compliance notices for safe operation.
Addresses RF interference, important safety instructions, and installation advice.
Specific measures to prevent fire and electrical shock.
Lists all included items in the projector package.
Overview of the VT800 projector's capabilities and features.
Guidance on positioning the projector relative to the screen for optimal display.
Steps for connecting a computer to the projector for image display.
Instructions for connecting HDMI-compatible devices like DVD players or PCs.
Instructions for establishing a network connection using the LAN port.
Step-by-step guide to powering on the projector correctly.
How to choose the active input signal for display.
Methods for adjusting image dimensions and placement on the screen.
Procedures for correcting trapezoidal distortion for a square image.
Proper steps to power down the projector safely.
Advanced keystone correction using the Cornerstone feature.
Setting up security features like password protection or USB key lock.
Displaying a PC screen image over a network using Network Projector.
Remotely operating a PC from the projector using Remote Desktop.
Steps for viewing slides and controlling playback from USB.
General guide on navigating and operating the projector's on-screen menus.
Options for adjusting the aspect ratio of the projected image.
Settings for matching the projector's resolution to the input signal.
How to enable or disable auto keystone correction and manual adjustment.
Advanced correction for trapezoidal distortion using the Cornerstone feature.
Adjusting image aspect ratio and vertical position for the screen.
Configuring the projector for network connectivity and operations.
Configuring security settings like panel lock, background lock, and PJLink password.
Setting the projector's default input source upon startup.
Instructions for cleaning or replacing the projector's air filter.
Step-by-step guide for safely replacing the projector lamp.
Helps diagnose and resolve common projector issues and error messages.
A checklist to identify and address typical problems encountered during use.
A systematic checklist to help identify if a problem requires professional service.
To Next Page
