b
n
b Raise and release the foot, and re-attach it with the
left side pin.
Starting just below zipper bottom stop, sew across
fabric to about 3/8˝ (1 cm) distance from the basting
line.
Turnfabric90degreesandsewaseamtheentire
length of the zipper tape. Before reaching the slider,
stop the machine with needle in fabric and raise the
foot. Use seam ripper to open a few inches of basting
stitch.
!3 Unstitch basting
!4 3/8˝ (1 cm)
n Unzip a few inches to clear a path for stitching.
At end of seam, sew a few stitches in reverse to lock.
Once both sides of zipper are sewn, use the seam
ripper to open the basting stitch.
!3
!4
To Next Page
Loading...
