Nectar Gold - Cleaning: Light Clean; Light Cleaning Steps

Prepare for cleaning
Before cleaning your device, it is important to
allow your device to completely cool down in
order to avoid injuries. Once cooled, detach
your colling unit and prepare your device for
cleaning by brushing away any loose leaf.
01
Cleaning the mouthpiece
02
Soak a pipe cleaner with isopropyl alcohol (ISO)
and scrub the inside of the mouthpiece. Wipe
away the ISO and excess particles by using a
clean and dry pipe cleaner. You can clean the
outside of the mouthpiece with an alcohol pad.
Cleaning the heating chamber
Soak a cotton swab or cleaning brush with ISO.
Insert into the chamber and scrub the sides and
bottom with a circular motion and repeating the
process until you are satisfied. Then dry using a
clean and dry cloth or cotton swab.
Cleaning: Light Clean
Perform a light clean once every 5 sessions (Steps 1 to 3).
03
10 11