Before sterilising your device, ensure it has been sufficiently
charged (see page 4). If sterilising after a clean, ensure your parts
have been wiped dry with a clean cloth before proceeding to the
next step.
Prepare for Sterilising
Sterilising in 3 steps
01
Set your vaporizer to the maximum temperature (240°C) by holding
the temperature ‘up’ button until your desired temperature is
reached. See Page 5 for more information.
Setting your temperature
02
Allow the device to heat for 5 minutes with an empty chamber in
order to sterilise it. The device has a built in 5-minute timer and
hence it will turn itself off once the sterilisation process in complete.
Repeat this step twice. Once without the cooling unit detached and
once with the cooling unit attached.
Sterilising
03
12 13
To Next Page
Loading...
