The Nectar HoneyBee is a premium e-liquid and CBD vaporizer designed to allow users to utilize the benefits of cannabinoids while eliminating the intake of toxins and carcinogens. It is a compact and portable device, featuring a sleek design and user-friendly interface.

Function Description:

The Nectar HoneyBee is primarily used for vaping thick oils, including CBD and THC oils, as well as e-liquids when used with a cotton coil cartridge. It operates by heating the oil in a cartridge to produce vapor for inhalation. The device is equipped with a pre-heating chamber, variable power settings, and a long-lasting battery to ensure an optimal vaping experience.

Usage Features:

Cartridge System:

The device utilizes a 510 magnetic fitting for its cartridges, making installation and removal straightforward. To open a cartridge, hold the glass body to prevent rotation and unscrew the mouthpiece anti-clockwise. Once open, the cartridge can be filled with your preferred oil. For filling, it is recommended to use a tip no more than 2mm in width to avoid spillage and to pour the liquid between the central post and the glass, ensuring the central post is not filled. After filling, screw the magnetic connection onto the cartridge and drop it into the device. A successful connection is indicated by all four LEDs lighting up for one second. For thinner oils like e-liquid, a cartridge with a cotton coil is recommended.

Power On/Off and Vaping:

To turn the device on or off, press the power button five times rapidly. The LED light will flash five times to confirm the action. For best results during vaping, draw gently on the mouthpiece using smooth, slow, and long tokes. Always use the device in an upright or mostly-upright position.

Variable Power Settings:

The Nectar HoneyBee offers four voltage settings, allowing users to customize their vaping experience. These settings are 2.8V, 3.2V, 3.6V, and 4.0V. To change the voltage, press the power button three times rapidly. The lights on the top side of the device will indicate the current setting.

One light: 2.8V
Two lights: 3.2V
Three lights: 3.6V
Four lights: 4.0V

Pre-Heating Function:

For use in cold temperatures or with thick oils, the device includes a pre-heating function. After turning on the device, press the power button two times rapidly to activate an automated 30-second preheat cycle. During preheat mode, the green LED lights will flash for 30 seconds. This function helps to make the oil easier to vape. The preheat can be stopped by pressing the button once.

Battery Level Indication:

The device provides clear indications of its battery level through its LED lights:

One light: 25% power
Two lights: 50% power
Three lights: 75% power
Four lights: 100% power (all four lights will be on when fully charged)

Maintenance Features:

Charging:

It is recommended to charge the device for one hour before its first use. When plugging the charger into the HoneyBee, the lights will blink to indicate the battery level. The charging time is approximately two hours. To protect and extend battery life, avoid overcharging the device.

Storage:

After using the device, allow it to cool down before storage. Store it in a dry and cool place to protect it from weather effects and prevent damage to the battery. Keep the device out of reach of children.

Long-Term Storage:

If the device is not planned for long-term use, it is recommended to recharge the battery at least once every three months to prevent degradation of battery performance. It is important not to use the product while it is charging, as this may decrease the battery life.

Cartridge Replacement:

For best results and optimal performance, it is recommended to replace cartridges with new ones after approximately five uses.

Condensation Treatment:

Condensation can occur due to the surrounding environment or by breathing into the device. This is not a cause for alarm and can be easily remedied. Simply turn the cartridge upside down and shake it lightly to remove the condensation.

Travel Considerations:

When flying or traveling, cartridges should be emptied or stored in a sealed package and kept away from other valuables. The low pressure inside aircrafts can cause leakages.

Warranty Registration:

Nectar offers a two-year warranty for the HoneyBee device. Users can register their device and activate the warranty by scanning a QR code or visiting the provided website.

Customer Support:

Nectar provides comprehensive customer support through various channels, including WhatsApp, email, and telephone, with specified average response times for each. Additionally, YouTube support is available with QR codes to access relevant videos and subscribe to their channel.

Nectar Honeybee - Warranty Registration; Warranty Registration Process

Related product manuals