Vaping Oils (CBD/Thick oils)
03
Magnetic Connector
Your device comes with a magnetic connector.
Install the cartridge by screwing on the magnetic
connection and dropping the cartridge inside the
device. Once connected properly, all 4 LEDs will
light up for one second
02
Filling the Cartridge
Fill the cartridge with your chosen thick oil* by
using a tip no more than 2mm in width to ensure
the cartridge can be filled without spillage. Pour
the liquid between the central post and the glass
(avoid filling the central post).
01
Opening the Cartridge
To open the cartridge, simply hold the glass body
with one hand to stop it from rotating and
unscrew the mouthpiece (anti-clockwise).
Unscrew the mouthpiece and fill the cartridge
with your preferred oil.
6 7
*To use the device with thinner oils such as eliquid, then please use a cartridge with a cotton coil.
To Next Page
Loading...