The Nectar Platinum is a smart vaporizer designed for dry herbs and extracts, focusing on providing the benefits of cannabinoids while minimizing the intake of toxins and carcinogens. The device aims for 100% customer satisfaction and offers various support channels for queries.

Function Description

The Nectar Platinum is a dry herb smart vaporizer that allows users to vaporize both dry herbs and extracts. It features a ceramic chamber and a Zirconia mouthpiece for optimal performance. The device is designed to heat materials evenly, ensuring efficient extraction of cannabinoids. It includes a rechargeable battery and a charging port for convenience.

Usage Features

Getting Started: Before first use, it is recommended to charge the Nectar Platinum for 1 hour. The OLED screen will display a blinking battery charging gauge, which will become solid when fully charged. Overcharging should be avoided to protect and extend battery life. The device charges in approximately 2 hours.

Vaping Dry Herbs:

Sterilising: Before initial use and after charging, the device should be sterilised. This involves setting the vaporizer to its maximum temperature (240°C) and allowing it to heat for 5 minutes with an empty chamber. The device has a built-in 5-minute timer and will turn off automatically. This step should be repeated twice: once without the cooling unit detached and once with it attached.
Packing the Chamber/Bowl: Grind your herbs and detach the cooling unit. Pour the herbs into the ceramic chamber, ensuring it is at least half full for best results. Gently compact the herbs to avoid restricting airflow.
Turning On: Hold and press the power button for 5 seconds to turn on the device. It will begin to heat up, indicated by a continuously blinking "" sign on the OLED screen.
Setting Temperature: Use the 'up' and 'down' buttons to adjust the desired temperature. Once the temperature is reached, the device will vibrate, and the "" sign will become solid.
Vaping: After the desired temperature is reached, wait an additional 20 seconds for even heating. Take long, slow, and smooth tokes, lasting approximately 5-10 seconds each, without pressing any buttons.
Temperature Selection: There is no single ideal temperature. It is recommended to start at 180°C and increase by 10°C per session until a preferred temperature is found.

Vaping Extracts:

Place Wax Pad: Ensure the chamber is cool and free of loose leaf or resin. Place the provided extract/concentrate/wax pad into the chamber.
Adding Extracts: Place a small amount of extract onto the pad, roughly half a grain of rice. Gradually increase the amount up to two grains of rice to find your preferred quantity. Avoid using too much wax to prevent overspill and blocked airflow holes.
Heating: Concentrates typically have higher boiling points than dry herbs. Set the device temperature to 230°C-240°C. After the device vibrates, wait an additional 20 seconds for even heating. Take long, slow, and smooth tokes (5-10 seconds each) to achieve the desired hit strength.

Timer Function: The device features an automatic 5-minute shut-off timer to conserve battery and prevent overheating. A vibration will alert the user when the device turns off. The timer setting can be toggled between 5 and 10 minutes by holding the 'power' and 'up' buttons together for 2 seconds.

Temperature Unit Toggle: The temperature unit can be switched between Celsius and Fahrenheit by holding the 'power' and 'down' buttons simultaneously for 2 seconds.

Post-Use Storage: After use, allow the device to cool down completely before storing it in a dry and cool place, away from weather effects and out of reach of children, to prevent damage to the battery.

Maintenance Features

Cleaning: Regular cleaning is crucial for optimal performance and longevity.

Light Clean (Every 5 Sessions):

Prepare for Cleaning: Allow the device to cool completely to avoid injuries. Detach the cooling unit and brush away any loose leaf.
Clean the Mouthpiece: Soak a pipe cleaner in isopropyl alcohol (ISO) and scrub the inside of the mouthpiece. Wipe away ISO and particles with a clean, dry pipe cleaner. The outside can be cleaned with an alcohol pad.
Clean the Heating Chamber: Soak a cotton swab or cleaning brush in ISO. Insert it into the chamber and scrub the sides and bottom with a circular motion until clean. Dry with a clean, dry cloth or cotton swab.

Deep Clean (Every 20 Sessions):

Dismantle the Cooling Unit:
- Pull the rubber holder out of the cooling unit.
- Invert the rubber holder.
- Push out the rubber holder filter and ceramic holder.
- Pull out the horseshoe slip.
- Detach the ceramic mouthpiece.
Cleaning the Filters (Method 1 - Alcohol Pads): Rub away residue from each part individually using alcohol pads. Reassemble, sterilise, and use.
Cleaning the Filters (Method 2 - ISO Soak): Soak all ceramic and metal parts from the cooling unit in a container filled with ISO. Scrub each part with an ISO-soaked brush. Rinse with lukewarm water and dry with a clean cloth. Reassemble, sterilise, and use.
- Note: Isopropyl alcohol deforms rubber. Do NOT soak rubber parts for more than 30 seconds.

Warranty and Support: The Nectar Platinum comes with a 2-year warranty. Users can register their device on the Nectar Medical Vapes website to activate the warranty. Customer support is available via WhatsApp, email, and telephone, with varying average response times. YouTube support videos are also available for cleaning, changing filters, and general usage. A Nectar Club Subscription offers benefits like annual device refurbishment, lifetime insurance, product worth, free upgrades, and discounts.

Nectar Platinum - Page 4

Related product manuals