The Nectar V2 is a dry herb smart vaporizer designed to allow users to utilize the benefits of cannabinoids while eliminating the intake of toxins and carcinogens. It aims for 100% customer satisfaction and offers a 2-year warranty upon registration.

Product Contents

The Nectar V2 package includes:

1x Nectar V2 device
1x Charging Cable
1x Accessory Kit
1x QR Code Card

Technical Specifications

Dimensions: 9.4cm x 3.1cm x 2.1cm
Device Weight: 124g
Colour: Matte Black
Compatible Ingredients: Dry Herbs
Temperature Range: 100°C - 225°C / 212°F - 437°F
Battery Capacity: 2600mAh (20A)
Materials: Ceramic Chamber / Aluminium Body / Zirconia Mouthpiece
Temperature Precision: 5°C Increments
Heating Time: 160°C in 30 seconds
Battery: 2200mAh
Display: OLED Screen
Airflow: Isolated Airflow

Diagram

The Nectar V2 consists of several key components:

Ceramic Mouthpiece: The part where the user inhales.
Main Body: The primary housing of the device.
Chamber Filter: Filters the vapor before it reaches the mouthpiece.
Chamber Cap: Covers the heating chamber.
Heating Chamber: Where the dry herbs are placed for vaporization.
Power Button: Used to turn the device on/off and start heating.
Up/Down Buttons: Used to adjust temperature settings.
Charging Port: For connecting the charging cable.

Operating Guide: Charging

Initial Charge: It is recommended to charge the Nectar V2 for 1 hour before its first use.
Charging Indication: When charging, the OLED screen will display a blinking battery charging gauge. It will stop blinking and show a full gauge once fully charged.
Charging Time: Approximately 2 hours.
Battery Protection: Avoid overcharging to protect and extend battery life.
Storage: After use, allow the device to cool down before storage. Store it in a dry and cool place, away from weather effects and out of reach of children, to prevent damage to the battery.

Operating Guide: Vaping Dry Herbs

Sterilising (Step 01):
- Detach the chamber cover by turning the vaporizer upside down and pressing on one edge of the cap.
- Before first use and after charging, sterilise the device (refer to page 11 of the manual for detailed sterilisation steps).
Packing your chamber/bowl (Step 02):
- Position the device upside down on a flat surface.
- Grind your herbs and pour them into the chamber, ensuring it is at least half full for best results.
- Press the herbs softly to compact them slightly, but avoid over-compacting as this will restrict airflow.
Turning your device on (Step 03):
- Press the power button 5 times to turn on the device.
- The OLED screen will display two temperatures: the 'set' temperature (blinking, selected by the user) and the 'run' temperature (detected in real-time).
- The device will vibrate once when it turns on.
- Tip: If the chamber cap gets stuck, insert the clearing rod through the mouthpiece hole and push it all the way through to dislodge the mouthpiece.
Setting the temperature (Step 04):
- Use the 'up' and 'down' buttons to increase or decrease your desired temperature.
- Press the power button to start heating. The device will vibrate once the desired temperature is reached.
Vaping your herbs (Step 05):
- Once the desired temperature is reached, wait an additional 20 seconds for the herbs to heat evenly.
- When ready, take long, slow, and smooth tokes, lasting around 5-10 seconds per toke, without pressing any buttons.
Choosing a temperature (Step 06):
- There is no single "optimum" temperature; it depends on personal preference and herb quality.
- It is suggested to start at 180°C and increase in 10°C increments until you find your preferred temperature.

Operating Guide: Timer

Automatic Shut-off: The device has an automatic timer that turns it off after 5 minutes to conserve battery and prevent overheating.
Vibration Alert: Another vibration will alert you when the device has turned off due to the timer.

Operating Guide: Toggles & Indicators

Temperature Units: To toggle between Celsius and Fahrenheit, press and hold the 'down' button for 2 seconds.
Haptic Feedback: To turn the vibrate function on or off, press and hold the 'up' button for 3 seconds.
Safety Function: The device vibrates when turned on/off. If left untouched for more than 60 seconds while on, the temperature will automatically drop to 120°C (with a vibration notification). The device will increase its temperature again once picked up.
OLED Screen Indicators:
- Set Temperature: The desired temperature selected by the user.
- Run Temperature: The real-time detected temperature.
- Heating Icon: Indicates when the device is heating.
- Battery Power: Shows the current battery level.
- Vibrate On: Indicates if haptic feedback is active.

Cleaning

Regular cleaning improves the device's lifespan and flavor.

Prepare for cleaning (Step 01):
- Allow the device to cool completely to avoid injuries.
- Detach the chamber cap.
- Brush away any loose leaf material.
Detaching the mouthpiece (Step 02):
- Grip the mouthpiece tightly between your thumb and forefinger and pull it out. Force may be needed as bearings secure it.
Cleaning the mouthpiece (Step 03):
- Soak a pipe cleaner with isopropyl alcohol (ISO) and scrub the inside of the mouthpiece.
- Wipe away the ISO with a clean/dry pipe cleaner.
- Clean the outside of the mouthpiece with an ISO-dipped cloth.
Cleaning the heating chamber (Step 04):
- Soak a cotton swab or cleaning brush with ISO.
- Insert into the chamber and scrub the sides and bottom with a circular motion until clean.
- Dry with a clean, dry cloth or cotton swab.
Cleaning the airflow path (Step 05):
- Soak a pipe cleaner with ISO and floss it through the airflow path from both ends.
- Use the clearing rod to push out leftover residue material by inserting it through either end.
- Dry with a new pipe cleaner, then sterilise and use.
Cleaning the chamber filters (Step 06):
- Use an ISO-dipped cloth or alcohol pads to rub away residue and clean each chamber filter individually.
- Reassemble the device, sterilise, and use.

Sterilising in 3 steps

Prepare for Sterilising (Step 01):
- Ensure the device is sufficiently charged (refer to page 4).
- If sterilising after cleaning, ensure all parts are wiped dry with a clean cloth.
Setting your temperature (Step 02):
- Set the vaporizer to the maximum temperature (240°C) by holding the 'up' button. (Refer to page 5 for more information).
Sterilising (Step 03):
- Allow the device to heat for 5 minutes with an empty chamber. The built-in 5-minute timer will turn it off once complete.
- Repeat this step twice: once without the cooling unit detached, and once with the cooling unit attached.
- Note: Isopropyl Alcohol (ISO) evaporates quickly. Any ISO on the vaporizer should evaporate within a minute, but it is still good practice to sterilise the vaporizer after each clean.

Nectar Club Subscription

The Nectar Club offers various benefits:

Receive a refurbished device every year.
Lifetime Insurance (Covers Accidental Breakage).
Receive products worth up to £613.19 every 2 years.
Receive a FREE upgrade/vaporizer once every 2 years.
Receive a lifetime discount (up to 15% off sitewide).
Monthly plans: Starter (£4.99/mo), Master (£12.99/mo), Guru (£18.99/mo).
More details available by scanning the QR Code or visiting nectarmedicalvapes.com/nectar-club-pricing/.

Nectar Warranty Registration

The Nectar V2 comes with a 2-year warranty. To activate it:

Provide Personal Details.
Provide Order Information.
Confirm registration. Scan the QR Code or visit nectarmedicalvapes.com/warranty/ to register your device.

Warnings

Liquids & Cleaning: Do not submerge the device or its chamber in water, ISO, or any other substance. Do not use viscous liquids/oils as they may block airflow holes.
Condensation Treatment: Condensation can occur due to the environment or breathing into the device. It can be wiped away and is not a cause for alarm. Turn the pod upside down and shake lightly to remove it.
Charging: Do NOT charge with a charger exceeding 5V/1A. Do not leave the device uncharged for over 2 months, as this can reduce battery capacity and lead to battery failure.
Law & Age: This device is for various herbs and extracts, some of which may be restricted or illegal. Users must check local jurisdictions for legality and minimum age restrictions.

Disclaimer

Read the instructions manual carefully for optimal performance and safety. Keep it in a safe place for future reference.
This device is not intended to diagnose, cure, treat, or prevent diseases. Consult a doctor for health problems.
Not for use by children, pregnant/breastfeeding women, or those with life-threatening illnesses without consulting a doctor. Do not use before driving or operating machinery.
Not intended to administer illegal substances. Users are responsible for checking local laws and age limits.

Certifications

CE: Certificate of Conformity (EU), indicating compliance with EU's New Approach Directives.
FC: Federal Communications Commission, equipment authorization issued by an FCC recognized Telecommunication Certification Body.
ROHS: Product level compliance based on the European Union's Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.

Support

YouTube Support Videos: Scan QR Codes or click links to subscribe to the Nectar channel for support videos.
Customer Support:
- WhatsApp: +44 773 2415 188 (Avg. Response: 0.5 hours)
- Email: info@nectarmedicalvapes.com (Avg. Response: 2 hours)
- Telephone: +44 207 050 0737 (Avg. Response: 30 seconds)

Nectar V2 - Nectar Warranty Registration

Related product manuals