Nedap PowerRouter Application Guideline

2
Installation - basic settings
To install the installation tool, start the "setup_installtool.exe" file which you have to
download from the PowerRouter site and follow the instructions.
Note: You can click the “?” icon in the upper-right corner at any time for help.
1.1 Select language
When you start the installation tool the rst time you will be asked
for your language. Select the preferred language and continue.
1.2 Detect PowerRouter
You can congure a new system using the installation wizard. The
wizard automatically detects whether you are connected to a new
PowerRouter system. The wizard guides you through the minimal
required settings to get your PowerRouter operational.
1.3 Select scenario
This step indicates the pre congured scenario of the installed
PowerRouter. This allows you to verify if you have the correct
PowerRouter installed. There are 3 scenarios:
1. “Feed-in” scenario
2. “Backup” scenario
3. “Self-use scenario
Note: Only for specic systems it is allowed to change the
scenario.
1
Figure 2: Select language
Continue
Figure 3: Detect PowerRouter
Figure 4: Scenario
ContinueBack

Nedap PowerRouter Specifications

General

Brand	Nedap
Model	PowerRouter
Category	Inverter
Language	English