VP5002-300PM-00GB-V-Scan Manual version 2.7 / Page 15
7. Click on the Refresh button. “V-Scan xx” will appear in the list. The V-Scan number is the
last number of the V-Scan’s serial number. Select the correct V-Scan and click Connect.
8. The PC starts to make a connection with the V-Scan (“pairing this V-Scan”). A pop-up
balloon may appear in the right bottom corner of the screen. Click on the balloon.
9. Enter the PIN code “0000”(four zeros) and press OK.
10. Next screen appears. The connection with the V-Scan is made successfully. Click OK.
To Next Page
Loading...