Nederman CX 5500 - Technical Data; Safety Regulations; Machine Markings

ENGLISH CX 5500
2
Cx 5500
Part No. 503141
Control No. 96370
In: 230 V, 50/60 Hz, 85 W.
Out: 30 V 50/60 Hz.
Made in Sweden
m = 8.6 kg
= 43 dB(A) U = 120/230 V
f = 50/60 Hz
T = 0 - 30˚ C
Technical data
Must only be used for
* Spot suction of soldering fume.
* Spot suction of gases (No explosive gases).
Machine markings
1
2
3
4
5
6
7
8
Safety regulations
CE-marking
The CE-marking on the machine denotes that the
machine has been manufactured in conformity with
standards and directive stated in "Declaration of
conformity".
Our levels of warning/Information are:
WARNING ! = Possible risk of severe injury or
death if you do not follow the given instructions.
CAUTION ! = Possible risk that the machine may
be damaged or injury if you do not follow the given
instructions.
NOTE ! = Important notes/information.
Electricity
Electrical repairs or maintenance may only be
performed by specially-trained personnel.
Explosive environment
The machine must not be used in an explosive
environment.
Rating plate
1 Logotype
2 Name of Product
3 Part number
4 Control number
5 Electrical data
CE plate
6 CE mark, see ”Declaration of conformity”
7 Manufacturer
8 Address of the Manufacturer
AB Lectrostatic
Box 314, Axvallagatan 3
S-532 24 Skara, Sweden