FilterCart Original
15
144027(01)
EN
• Check that the hose to the fan inlet is not damaged. If necessary, change
the hose.
• Check that no objects have been caught on the guard net on the fan inlet.
• If necessary, adjust the Fume Extractor links.
• If necessary, tighten the arm prole bolts, see the * symbols in Figure 7.
• Check that the mains connection cable and the fan motor cable are not
worn or damaged.
• Check that the eccentric locks tighten the lter casing properly. Adjust the
eccentric locks if necessary.
9.1 Spare parts
See www.nederman.com.
When ordering spare parts always state the following:
• Part number and control number (see the product identication plate).
• Detail number and name of the spare part (see www.nederman.com).
• Quantity of the parts required.
10 Recycling
The product has been designed for component materials to be recycled.
Its different material types must be handled according to relevant local
regulations. Contact the distributor or Nederman if uncertainties arise when
scrapping the product at the end of its service life.
To Next Page
Loading...
Need help?
General
