Time-setting options en
21
Caution!
Enamel damage: Do not start any operations when
there is water on the cooking compartment floor. Before
operation, wipe away the water from the cooking
compartment floor.
1. Leave the appliance to cool down.
2. Remove the worst dirt from the cooking
compartment immediately and wipe away moisture
from the cooking compartment floor.
3. If necessary, touch the # touch button to switch the
appliance on.
4. Touch the 0 touch button to display the operating
modes.
5. Use the ( or ) button to select "Drying ª".
6. Use the & button to navigate to the next line.
The duration is displayed. It cannot be changed.
7. Use the & button to navigate to the next line.
8. Touch the # touch button.
The drying function is started and is ended
automatically after 10 minutes.
9. Open the appliance door and leave it open for 1 to 2
minutes so that the moisture in the cooking
compartment can escape.
Drying the cooking compartment by hand
1. Allow the appliance to cool down.
2. Remove any food remnants from the walls of the
cooking compartment.
3. Dry the cooking compartment with a sponge.
4. Leave the appliance door open for 1 hour so that the
cooking compartment dries completely.
OTime-setting options
Ti me- s et t i ng opt i ons
Your appliance has different time-setting options.
Note: If you have set a time-setting option, the time
interval increases if you set a higher value. Example:
You can set a cooking time of up to one hour in one-
minute increments; for cooking times over one hour,
you can set a cooking time in five-minute increments.
Showing and hiding the time-setting options
To show or hide the time-setting options, touch the
0 touch button.
Note: After a particular length of time, the time-setting
options that are shown are automatically hidden. If you
have already set a cooking time, it will be applied.
Setting the timer
The timer can be set when the appliance is switched on
or off.
1. Touch the 0 touch button.
The time-setting options are shown on the display.
2. Select the cooking time using the ) button.
Note: When the appliance is switched on, use the %
button to navigate to the Timer . line and then
select the cooking time using the ) button.
3. Touch the 0 touch button to start the timer.
The . symbol appears on the display.The timer
counts down.
Note: As soon as the set time has elapsed, a signal
sounds. To cancel the signal tone, touch the 0 touch
button.
Time-setting option Use
. Timer The timer functions like an egg timer. The
appliance does not switch on and off auto-
matically.
+ Cooking time Once the set cooking time has elapsed,
the appliance switches off automatically.
* Ready at The appliance switches on automatically,
and once the set cooking time has
elapsed and the end time has passed, it
switches off automatically.
--:-- min | s
--:-- h | min
17:20
Cooking time
Ready at
Timer
To Next Page
Loading...
Need help?
General
