EasyManuals Logo

NEFF B47VS34H0B User Manual And Installation Instructions

NEFF B47VS34H0B
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
en Steam
14
7.
Slowly slide the control panel downwards and then
push it away from you until it is closed completely.
8.2 Refilling the water tank
When "Fill water tank" appears on the display, you
must refill the water tank.
Notes
¡ Dough proving and Reheat functions: If you do not
refill the water tank, the appliance will stop. Refill the
water tank.
¡ Steam-assisted heating: If you do not refill the water
tank, the appliance will continue to heat but without
injecting steam into the cooking compartment.
1.
Open the control panel.
2.
Remove and refill the water tank.
3.
Insert the full water tank and close the control panel.
8.3 Steam heating functions
Your appliance has several steam heating functions:
¡ Dough proving
¡ Reheat
Dough proving
Yeast dough will prove considerably more quickly us-
ing the "Dough proving" heating function than at room
temperature, and it will not dry out.
Configuring the Dough proving heating function
Requirement:The cooking compartment must have
cooled down completely.
1.
Fill the water tank.
→"Filling the water tank", Page13
2.
Press to switch the appliance on.
3.
Use the or button to set "Dough proving" ⁠.
4.
Use the button to navigate to the next row.
5.
If necessary, use the button to set setting 2.
6.
Use the button to navigate to the next row.
7.
Use the or button to select the required proving
time.
8.
Press to start the dough proving process.
→"Pausing operation", Page12
→"Cancelling operation", Page12
a If the water tank runs dry during the dough proving
process, dough proving will be paused.
→"Refilling the water tank", Page14
a Once the duration has elapsed, an audible signal
will sound and the appliance will stop heating.
→"Switching off the appliance", Page12
9.
Press any button to end the audible signal.
10.
Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page15
Reheat
The "Reheat" function is used to warm up food that has
already been cooked, or bread and pastries from the
day before, without affecting its quality.
Configuring the Reheat heating function
1.
Fill the water tank.
→"Filling the water tank", Page13
2.
Press to switch the appliance on.
3.
Use the or button to set "Reheat" ⁠.
4.
Use the button to navigate to the next row.
5.
Use the or button to select the required temperat-
ure.
6.
Use the button to navigate to the next row.
7.
Use the or button to select the required reheating
time.
8.
Press to start the reheating process.
→"Pausing operation", Page12
→"Cancelling operation", Page12
a If the water tank runs dry during the reheating pro-
cess, reheating will be paused.
→"Refilling the water tank", Page14
a Once the duration has elapsed, an audible signal
will sound and the appliance will stop heating.
→"Switching off the appliance", Page12
9.
Press any button to end the audible signal.
10.
Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page15
8.4 Steam-assisted cooking
When you cook with steam assistance, the appliance
introduces steam into the cooking compartment at vari-
ous intervals. This gives your food a crispy crust and a
shiny surface. Meat stays juicy, tender and only under-
goes a minimum reduction in volume.
Heating functions compatible with steam
assistance
You can switch on steam assistance for the following
heating functions:
¡ "CircoTherm hot air"
¡ "Top/bottom heating"
¡ "Circo-roasting"
¡ "Bread-baking setting"
¡ "Keep warm"
Switching on steam assistance
1.
Fill the water tank.
→"Filling the water tank", Page13
2.
Press to switch the appliance on.
3.
Set a suitable heating function.
→"Heating functions compatible with steam assist-
ance", Page14
4.
Set the required temperature.
5.
Use the button to switch on steam assistance.
6.
Use the button to navigate to the row featuring
the steam intensity ⁠.
7.
Use the or button to select the required steam in-
tensity:
Low
Medium
High
8.
Press to start steam-assisted heating.
a If the water tank runs dry during steam-assisted
heating, "Fill water tank" will appear on the display.
The appliance will continue to heat but without in-
jecting steam into the cooking compartment.
→"Refilling the water tank", Page14
Cancelling steam-assisted cooking
Press ⁠.
a The appliance will continue to heat but without in-
jecting steam into the cooking compartment.

Other manuals for NEFF B47VS34H0B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEFF B47VS34H0B and is the answer not in the manual?

NEFF B47VS34H0B Specifications

General IconGeneral
BrandNEFF
ModelB47VS34H0B
CategoryOven
LanguageEnglish

Related product manuals