15
In the dishwasher:
Note: If the metal mesh grease filters are cleaned in the
dishwasher, slight discolouration may occur. This has no effect
on the function of the metal mesh grease filters.
Do not clean heavily soiled metal mesh grease filters together
with utensils.
Place the metal mesh grease filters loosely in the dishwasher.
The metal mesh grease filters must not be wedged in.
Installing the metal mesh grease filter
1. Insert the second metal grease filter under the filter cover with
the lock facing downwards.
Insert the metal grease filter on the underside of the
appliance.
2. Fold the metal grease filter back and lock.
3. Close the filter cover.
4. Press and hold the button for two seconds.
The saturation indicator is reset.
Changing the activated charcoal filter
(only in circulating-air mode)
In order to guarantee efficient odour filtration, the filter must be
serviced regularly.
The activated charcoal filters must be replaced at least every
4 months.
Notes
The activated charcoal filters are not included in the delivery.
The activated charcoal filters can be obtained from specialist
retailers, from our after-sales service or from the Online Shop.
The activated charcoal filters cannot be cleaned or
reactivated.
1. Remove the metal grease filter, see above.
2. Turn the old activated carbon filter and remove from the
holder.
3. Insert the new activated carbon filter into the holder and turn.
4. Install the metal grease filter, see above.
5. Press and hold the button for two seconds.
The saturation indicator is reset.
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a licensed
technician (electrician).
Malfunction table
--------
Problem Possible cause Solution
The appliance
does not work
The plug is not
plugged in.
Connect the appliance to
the electricity supply
Power cut Check whether other
kitchen appliances are
working
Faulty fuse Check in the fuse box to
make sure that the fuse for
the appliance is OK
The button illu-
mination does
not work.
The control unit
is faulty.
Call the after sales service.
The lighting
does not work.
The lighting is
defective.
Call the after-sales service.
If or
appears on the
display
The grease or
activated char-
coal filter is sat-
urated.
Clean the filter see sec-
tion "Cleaning and mainte-
nance".
To Next Page
Loading...
