9
1. Remove the magnetic panel.
2. Take out the activated charcoal filter.
Fitting the activated charcoal filter (only in
circulating-air mode)
1. Take the new activated charcoal filter out of its packaging
and insert it in the air recirculation module.
2. Fit the panel such that it is held firmly in place by the
magnets.
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
: Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a licensed
technician (electrician).
Malfunction table
--------
Fault Possible cause Solution
The appliance does not work The plug is not plugged into the mains Connect the appliance to the power
supply
Power cut Check whether other kitchen appliances
are working
The fuse is faulty Check in the fuse box to make sure that
the fuse for the appliance is in working
order
The lighting is not working The LED lights are defective Call the after-sales service
F is lit permanently. The metal grease filter is saturated. Clean the metal grease filter; see sec-
tion Cleaning and maintenance.
To Next Page
Loading...
Need help?
General
