Cleaning and care
21
Isolate the extractor hood by pulling
out t
he mains plug or switching off the
fuse.
Do not clean the extractor hood with
abrasive sponges or with cleaning agents
which contain sand, soda, acid or chlorine.
Clea
n the extractor hood with a hot
soap solution or a mild window
cleaner.
Do not scrape off dried-on dirt but
wipe off with a damp cloth.
W
hen clearing the grease filters,
remove grease deposits from
accessibile parts of the housing. This
prevents the risk of fire and ensures
that the extractor hood continues
operating at maximum efficiency.
Note: do not u
se alcohol (spirit) on
plastic surfances, as dull marks may
appear.
Caution! Ensure that kitchen is
adequately ventilated. Avoid naked
flames.
Clean the operating buttons with a
mild soapy solution and soft, damp cloth
only.
Do not use stainless-steel cleaner to clean
the oper
ating buttons.
Stainless Steel surfances:
Use a mil
d non abrasive stainless
steel cleaner.
Clean the surface in the same
direction a sit has been ground and
polished.
Aluminium and plastic surfaces:
Do not use
dry cloths.
Use a mil
d window cleaning agent.
Do not use
aggressive, acid or caustic
cleaners.
Observe the warranty regulations in the
e
nclosed service booklet.
To Next Page
Loading...
Need help?
General
