en
11
Switching the appliance on
Switch on the appliance with the ON/OFF button.
A warning signal sounds.
Press the “alarm off/lock” button. The warning signal
switches off.
Display alarm goes out when the appliance has
reached the set temperature.
The preset temperatures are reached after several
hours. Do not put any food in the appliance
beforehand.
The factory has recommended the following
temperatures:
■ Freezer compartment: -18 °C
■ Refrigerator compartment: +4 °C
Setting the temperature unit
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
Setting the temperature unit
To set the temperature unit, simultaneously press
the “freezer” button and the “fridge” button for
5 seconds.
Depending on the previous setting, the display
switches to the other temperature unit.
Setting the temperature
Freezer compartment
The freezer compartment can be set from -14 °C to
-24 °C.
We recommend a setting of -18 °C.
The value last indicated is served by the system.
1. Press the “freezer” button until “freezer” is lit on the
freezer compartment display panel.
2. Set the temperature with the + (warmer) or - (cooler)
setting buttons.
Refrigerator compartment
The refrigerator compartment can be set from +2 °C
to +8 °C.
The temperature can be set at 1 °C intervals.
The value last indicated is served by the system.
We recommend a setting of +4 °C.
Perishable food should not be stored above +4 °C.
1. Press the “fridge” button until “fridge” is lit on the
refrigerator compartment display panel.
2. Set the temperature with the + (warmer) or - (cooler)
setting buttons.
To Next Page
Loading...
Need help?
General
