About air assist
NEJE E80 is equipped with 2 high-temperature-resistant (1000°C) protective lenses, which
can be replaced. Pay attention to regularly cleaning the surface oil and foreign matter
according to the actual use case. Oil and foreign matter sticking to the surface may cause
high temperature to soften the lens.
NEJE E80 can use 2 types of air assist. a. Conical air nozzle in the inner cavity, this method
needs to use oil-free and water-free air source, (Note: ordinary oil-water filters can only filter
simply, not completely, and need to be cleaned regularly built-in protective lens) b. Stainless
steel pipe air nozzle, this method can use oily water air source, easy maintenance, and can
quickly clean the lens, the metal pipe needs to be aligned with the focus.
When cutting mdf, leather and high-density materials, it is necessary to add air assistance
with a pressure of not less than 30psi.
To Next Page
Loading...