NELO 7 - Seat Adjustment

4. FITTINGS
How it works
Adjusng the seat height and angle
1 - Remove your seat from your boat (if it’s installed)
2- The seat and the seat rails* have a few adjustable
opons
3 - Loosen the 4 screws that are aached to the seat and
choose the right height and angle posion
4- When done ghten well the 4 screws again.
5- Put the seat on the boat.
* SEAT RAILS
-1
0
1
2
-1
0
1
2
-1
0
1
2
-1
0
1
2
You can adjust the seat height in four
different posions.
From an ultra low posion (-1) to a higher one (2).
Each step is 1cm.
FROM -1 to 2