NELO 7 - Rudder Adjusting System

CABLE GUIDES
Are used to guide the rudder cables to the
crosspiece. They are low fricon so you can
have a smooth boat control.
RUDDER CABLES
The rudder cables make the connecon
between T-Bar and Rudder Crosspiece and
allows the rudder to work, so your boat will
turn correctly.
RUDDER ADJUSTING SYSTEM
It is used to ghten the rudder cables, in a
quick way, which allows the rudder to turn
beer.
1. Hold rudder straight
2. Adjust the cables at the new adjusng system
3. Unl t-bar stands straight at the middle
How it works
Thanks to its easy pulling system you just need to pull to
ghten or extend the rudder cables unl they are as you
want.
4. FITTINGS
NOT JUST A NUMBER HOLDER
You can use the Number Holder to x some
useful tools.
The number holder it’s compable with
GoPro mount system so you can place here,
for example, your camera or a Nelo
Waterproof Phone Bag.
It’s also a comfortable bed for your rudder
when you’re in travel.
Nelo Waterproof Phone Bag
available at shop.nelo.eu
Be creave with
the Number Holder
NEW ADJUSTING SYSTEM
During the transportaon use
it to keep your rudder safe.