neno primo - Breast Pump Usage and Maintenance; Assembling the Breast Pump; Charging the Breast Pump; Using the Breast Pump

11
Breast shield
Breast pump elements
(connector, sucon cap,
sucon bowl)
The bole and teat
Before first use
Aer each use
Once a day
Cleaning
Cleaning and sanizing
Sanizing
Cleaning
Cleaning and sanizing
Sanizing
Cleaning
Cleaning and sanizing
Sanizing
7. ASSEMBLING THE BREAST PUMP
1. Wash your hands thoroughly with soap and water before touching the breast pump and
breast.
2. Aach the breast shield, sucon bowl and sucon cap to the connector.
3. Place the valve in the connector and screw the milk bole onto the connector by turning
it clockwise unl it stops turning.
Tips:
a. Check the breast pump components for damage before each use. Replace damaged items
with new ones as needed.
b. Always check the cleanliness of the elements before using the machine.
c. To avoid damage to the breast pump, make sure that all its parts are dry before using it.
8. CHARGING THE BREAST PUMP
Before the first use, charge the breast pump for 2 hours by connecng it to the power supply
using the USB cable. The baery icon on the display will be full when charging is complete.
9. USING THE BREAST PUMP
See - Figure 4 on page 2
1. Place the breast shield on the breast so that the nipple is inside the drainage channel.
2. Press the breast shield and the connector to your breast, using your thumb and forefinger.
Support your chest with the palm of your hand.
3. Turn on the breast pump by pressing the power buon and select the mode of operaon
that suits you.
4. Press the power buon to turn off the breast pump aer use and place the lid on the breast
shield to protect the machine from dust.
a. The breast pump starts work in the smulaon mode. Set the sucon power to a level that
is comfortable for you using the +/- buons
Smulaon mode - fast pumping that mimics the natural sucking of breast milk by a baby,
smulang milk flow.
b. Aer 2 minutes, the breast pump will automacally acvate the expression mode. Adjust
the level of sucon using the +/- buons to find the highest level of sucon that is
comfortable for you. If milk begins to flow out of your breast before two minutes pass, press
the mode buon to manually switch to the expression mode.