neno primo - Page 5

13
1. Cleaning the breast pump components (Before first use and aer each use):
Step 1 - Disassemble the device and rinse all parts that have come into contact with the
breast and milk in cold water to get rid of the remains of milk and any residue.
Step 2 - Soak in warm, soapy water for 5 minutes, then wash and rinse
Step 3 - Let the parts air dry. Store dry device parts in a cool and dry place when you're not
using them.
minute
5
minutes
10
2. Sterilizaon of the breast pump components (before first use and aer use):
Step 1 - Fill the pot with enough water to cover all parts of the disassembled appliance.
Bring the water to a boil before you put the unfolded breast pump inside.
Step 2 - Place the parts of the device in boiling water for 10 minutes.
Step 3 - Let the parts air dry. Store dry device parts in a cool and dry place when you're not
using them.
Prepare:
-mild soap or other cleaning agent,
-clean dish towel.
Parts that need to be cleaned:
-pumping device.
3. Cleaning the pumping device: