NEO Coolcam NIP-MJPEG User Manual

WWW.SZNEO.COM IPCAM User Manual
Page 7
·Now we can see it as below.
Note: The camera can be in the LAN or WAN, but it must be connected to the Internet !
3.2 Add camera in LAN
·Click "Device List " , the following dialog box :
Click on the list of devices
LAN equipment Click to open the search interface
External network equipment Click
the Add button
Shenzhen NEO Electronics Co., Ltd
Tel: 86 755 29642263、29642252、29642256、29642259 Fax: 86 755 29667746
All manuals and user guides at all-guides.com

NEO Coolcam NIP-MJPEG Specifications

General

Brand	NEO Coolcam
Model	NIP-MJPEG
Category	IP Camera
Language	English

Summary

Hardware Installation

Package contents and antenna installation

Unpacking the device and attaching the wireless antenna for initial setup.

Network cable connection

Connecting the camera to a router or switch using an Ethernet cable.

Power connection and indicator checks

Connecting the power adapter and verifying indicator lights for proper operation.

Software Installation

CD-ROM installation procedure

Installing the software from the provided CD-ROM or autorun file.

Device search and login

Using the search tool to find the camera on the network and logging into its interface.

Wireless network configuration

Connecting the camera to a wireless network by selecting SSID and entering the password.

DDNS setup and configuration

Configuring Dynamic DNS settings for remote access to the camera.

Plug-and-Play Software

Adding cameras via P2P

Adding a camera to the software using its P2P ID number for remote connection.

Adding cameras in LAN

Adding a camera to the software via a local area network connection.

Adding cameras in WAN

Adding a camera to the software via a wide area network connection.

Interface Functions

PTZ control

Controlling the camera's pan, tilt, and zoom functions through the interface.

Video control

Managing video playback, audio, photo capture, and multi-device monitoring.