Need help?Do you have a question about the Neo Instruments VENTILATOR and is the answer not in the manual?
Accepts mono organ, keyboard, and guitar signals for processing.
Adjusts input gain for different instruments; Overload LED acts as a level meter.
Lights up to indicate signal level reaching circuit threshold for optimal gain.
Provides stereo output; R/MONO jack can be used for mono signal output.
Accepts optional footswitch for remote control of Slow/Fast and rotor stop.
Selects speaker simulation for organ (KEY) or disables it for guitar (GIT).
Requires the included 12V DC adapter; cannot be powered by batteries.
Turns the rotary effect on/off with a true bypass circuit.
Switches rotor speed between slow and fast, with LEDs indicating current speed.
Adjusts the rotational speeds for both bass and treble rotors in slow/fast modes.
Controls the time taken for rotors to transition between slow and fast speeds.
Adjusts relative volumes of bass and treble speakers, acting as an EQ.
Activates and controls the on-board tube simulator for added distortion.
Determines virtual microphone placement, affecting sound character and modulation.
Device is for low-frequency audio signals; unauthorized use invalidates warranty.
General| Brand | Neo Instruments |
|---|---|
| Model | VENTILATOR |
| Category | Recording Equipment |
| Language | English |
To Next Page
