Neo Instruments VENTILATOR - Technical Specifications

21
IV. SPECIFICATIONS
Signal processing 32 Bit SHARC DSP
Analog Digital Conversion 48khz, 24 Bit
Digital Analog Conversion 48khz, 24 Bit
Noise Level -80 dBA
Input Sensivity -10 dBV (Hi), 0 dBV (Lo)
Input Impedance 1MOhm
Output Level +6 dBV
Output Impedance 100 Ohms
Recommended Load Impedance 10 KOhms or more
Weight 1.1kg / 2 lbs 7 oz (without
Power Supply)
Dimensions (W x D x H) 192 x 153 x 55mm
Mains Voltage 100V-240V, 47Hz-63Hz
Current Draw < 300mA
Connectors Input Mono (Stereo Bypass
optional)
Output L
Output R / Mono
Remote
Controls Speed Trim
Acceleration Trim
Rotor Balance
Drive Gain
Mic Distance
Effect Bypass
Slow / Fast
Hi / Lo Gain
Git / Key (Speaker
Simulation on / off)
Options Ventilator Remote switch
Halfmoon Switch CU-1
Subject to change without notice.