Need help?Do you have a question about the NeoDen NeoDen9 and is the answer not in the manual?
Physical dimensions and structural components of the NeoDen9 machine.
Crucial safety warnings and precautions for operation and setup.
Operational workflow, process for creating programming files.
Editing PCB files, forward/backward settings, length and safe height.
Setting up panelized boards and mirrored PCB arrangements.
PCB mark points, alignment methods, and coordinate information.
Component list setup, batch creation, and submodule generation.
Feeder information, basic settings, pick height, and nozzle selection.
Assembly interface, component lists, speed, and placement parameter configuration.
Performing manual tests for feeders, cameras, nozzles, and initialization.
Basic configuration, system parameters, and feeder/component position setup.
Component inspection, pickup failures, feeder/nozzle maintenance, and paste printing issues.
General| Machine Type | Pick and Place Machine |
|---|---|
| Placement Head Quantity | 9 |
| Nozzle Quantity | 9 |
| Component Range | 0402 |
| Software | NeoDen |
| Power Supply | AC 220V |
| Machine Dimensions | 1200mm |
To Next Page
