31
Current value:
Display the current value.
Calibration:
In this field set the value of the calibration.
Digital Inputs
Only for TDE /TDT temperature sensor and TP temperature and proximity sensor.
ID
The ePowerSwitch 8M+
R2
automatically creates an ID Code to clearly identify each Digital input.
• DI followed by a number identifies each Digital Input,
• EOL followed by a number identifies the End Of Line input.
Create new rule:
Click on this button to create a new rule.
Name:
In this field enter the name you want to give to the digital input.
Do not use quotes or special characters in labels!
LOGOUT:
Click "Logout" at the bottom of the page to exit the session without saving changes.
DISCARD CHANGES:
Click "Discard Changes" at the bottom of the page to discard all the changes you have made on this page.
APPLY CHANGES:
Click "Apply Changes" at the bottom of the page to save changes.
To Next Page
