Neoline G-TECH X36 - Motion Sensor Function; Firmware Update Process

EN
When this function is activated, the DVR starts recording when it detects motion in the
view area of the lens.
CAUTION! In this mode the device is on and consumes the energy of the car battery as
usually.
1) Please download the firmware file at the official website and extract the file.
2) Format the memory card and move the extracted file to the micro SD memory card.
3) Insert the memory card with the file into the DVR memory card slot.
4) Connect a power source and turn the device on. While the firmware file is
downloading, the indicator flashes. The update process will be displayed on the screen.
5) Once the update is complete, the device restarts automatically. When you turn the
device on, it will prompt you to format the memory card to delete the firmware files from
the memory card.
6) Please enter the Settings menu and check whether the correct firmware version is
displayed.
7) Please format the memory card (use the DVR menu) if you cancelled formatting after
the upgrading and rebooting the device.
CAUTION! Do not turn off the DVR power during the firmware update.
Updating the firmware
Motion sensor
13