Neoline X-COP 9100s - Operation Conditions

2
[ Operation Conditions ]
1. Please read the terms and conditions specied in your warranty card.
2. Install the hybrid in accordance with the manual. To avoid accidents, observe the prescribed rules.
3. Use only the power cord from the kit. Using a third-party charger (even with similar connections) may compromise the
performance.
4. Observe the storage and operation temperature conditions (see specications). Do not expose the unit to sunlight for too long.
5. When leaving the car, make sure the X-COP 9100s is turned o; avoid leaving a powered device unattended for too long; it
can lead to excessive battery consumption and reduce the life of the hybrid (however, when in Parking mode, the unit can only
consume the battery until a specied charge level is reached).
6. Handle the device with due car; avoid dropping/crushing the device.
7. To avoid accidents, please, never do anything to the device while driving.
8. Before cleaning the car interior, remove X-COP 9100s to avoid a cleaner on it, as this can change its appearance or even impair
its performance.
9. Do not install the device where the airbag may appear.
10. Use the voltage of 12-24 V.
11. Avoid any covers on the device when operating.
12. The hybrid readings may be inaccurate due to possible third-party emissions. Heavy emissions can aect proper operation of
the device. The readings may vary depending on the landscape features.