Neomatica ADM007 - Description of Tracker Commands

OOO Neomatica. Terminal ADM007 GLONASS / GPS. Rev.1.3 dated 13.09.2019
18
7 Description of commands
Table 1. Description of commands
Command
Answer
Parameters
Description
1
Name X
Example:
Name bus8
Device Name ‘X‘
Example:
Device Name ‘bus8‘
X – tracker name
Set the name of the tracker. The name can contain only
letters of the Latin alphabet and numbers. The name
cannot exceed 10 characters in length. The tracker
name is added to the alarm SMS messages.
2.1
ADD ME X,Y (only by
SMS)
Example:
ADD ME 1234
ADD ME 1234,2
PHONES (0)= (1)= (2)=(3)=
Example:
PHONES(0)=+7xxxxxxxxxx
(1)= (2)= (3)=PHONES
(0)=(1)= (2)=
+7xxxxxxxxxx (3)=
X – password, the default
is "0".
Y=0..3 – number of the
memory location to store
the number. Optional
parameter.
Authorize the phone number from which the SMS was
received and write it to the memory cell Y. The
command is needed only to create a list of numbers for
controlling the tracker via SMS.
2.2
ADD ME X,Y (only by
Bluetooth and GPRS)
Example:
ADD ME +7xxxxxxxxxx,1
PHOES (0)= (1)= (2)= (3)=
Example:
PHOES (0)= (1)=
+7xxxxxxxxxx (2)= (3)=
X – phone number
Y=0…3 – number of the
memory location for
storing the number
Adding a phone number from which you plan to manage
the tracker via SMS.
3
PHONES X
Example:
PHONES 1234
PHOES (0)= (1)= (2)(3)=
Example:PHONES (0)=(1)=
+7xxxxxxxxxx (2)= (3)=
X –password, default is
"0".
Request a list of authorized phone numbers.
4
PASS X,Y
Example:
PASS 0,86974543
Pass=X,Y
Example:
Pass=86974543
X – old password, default
X=0. Y – New password.
Change the password from the old X to the new Y.
The password is a number from one to eight characters.
5
STATUS
Example:
ID=1 Soft=0x1A GPS=9291
Time=11:21:39 25.02.10
Nav=0 Lat=57.2359
Lon=56.2593 Speed=0.0
SatCnt=5 Stat=0x0000
Command without
parameters.
Query the current state of the tracker.
ID - the number of the tracker, Soft - the software
version, GPS - the current number of the information
packet, Time - current time and date according to
Greenwich Mean Time
Nav - reliability of coordinates,
Lat is the latitude,
Lon - longitude,
Speed - speed,
SatCnt - the number of satellites,
Stat - status.
6
IMEI
Example:
IMEI
IMEI
Example:
IMEI 359587013832624
Command without
parameters.
Request IMEI GSM-module installed in the tracker. The
command runs 20 seconds after the tracker is switched
on or restarted.
7
SN X
Example:
SN 123456789
SN X
Example:
SN 123456789
X –settable tracker ID
Set the tracker ID.
8
PIN0 X
Example:
PIN0 1234
PIN0 X
Example:
PIN0 1234
X –pin code sim card
Set the PIN code of the SIM card.
9
SETGPRS0 X,Y,Z
Example:
SETGPRS0
internet.mts.ru,mts,mts
GPRS0: APN=X, user=Y,
pass=Z
Example:
X – access point, default
X=internet.beeline.ru;
Y - login, default
Y=beeline;
Set APN settings for the SIM card. A command without
parameters returns the current GPRS settings for the
SIM card.