EasyManua.ls Logo

Neopost IJ-50 - User Manual

Neopost IJ-50
107 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IJ40-0006-1/B
4127759Y/C
01/02/2006
1
WARNING!
Do not under any circumstances attempt to remove the machine
covers or attempt to repair the IJ-35/40/50. There are no operator
serviceable parts thereunder.
The IJ-35/40/50 product is licensed for use under the conditions of
the Royal Mail. This license is issued subject to the product being
secure at all times. Any removal of covers or dis-assembly of the
product will result in the license being revoked and may result in the
Royal Mail requesting Neopost to remove the product from use.
The ink cartridge system used within the IJ-35/40/50 contains
Royal Mail approved ink. This cartridge should not be tampered
with in any way or the use of non approved inks be undertaken. This
will breach any Royal Mail licence agreement on the product and
may result in the Royal Mail requesting Neopost to remove the
product from use.
EC DIRECTIVE 1999/5/EC
Neopost declares that this Franking Machine is in compliance with
the Essential Requirements and other provisions of Directive
1999/5/EC. A full copy of this Declaration may be found at
www.neopost.co.uk/docs/IJ35Compliance.htm
MODEM APPROVAL REQUIREMENTS
This equipment contains a modem which has been approved
in accordance with Council Decision 98/482/WC-CTR21 for
pan-European single terminal connection to the Public Switched
Telephone Network (PSTN). However, due to differences between
individual PSTNs provided in different countries, the approval
does not, of itself, give an unconditional assurance of successful
operation on every PSTN network termination point.
The modem is designed to work on analogue telephone lines only.
In the event of problems, you should contact your equipment
supplier in the first instance.

Table of Contents

Other manuals for Neopost IJ-50

Questions and Answers

  • M
    Michael TuckerAug 10, 2025
    What to do if Neopost Postal Equipment shows a connection error?
    • S
      Scott StewartAug 10, 2025
      If your Neopost Postal Equipment displays a connection error, here's what to check: * Verify the phone cable is properly connected. * Ensure the phone number is correct and complete. * Confirm the prefix is accurate and included. * Check for a dial tone on the phone line. If there's no dial tone, inspect the phone line or contact your supervisor.
  • R
    Robert OlsonAug 27, 2025
    What to do if Neopost IJ-50 Postal Equipment shows EC201 EConf upload failed error?
    • M
      Marvin WilsonAug 27, 2025
      If you encounter an 'EC201 EConf upload failed! Server Error' message on your Neopost Postal Equipment, it indicates an issue with the server's communication with the meter or the device itself. The suggested solution is to try again.

Neopost IJ-50 Specifications

General IconGeneral
BrandNeopost
ModelIJ-50
CategoryPostal Equipment
LanguageEnglish

Related product manuals