Neoteck 8233D Pro - Introduction to the Digital Multimeter; Essential Safety Precautions; General Safety Warnings

8233D PRO-EN
1
6-3. Cleaning and Decontamination …………………………....................14
1. Introduction
Neoteck instrument is a handheld and battery operated Digital Multi
Meter(DMM) with multi function. This Meter is designed to meet IEC61010-1 &
CAT II 600V over voltage category and double insulation. The meter with holster
that is giving the main body, though downsized, high resistance against the
shock of a drop.This operating instruction covers information on safety and
caution. Please read relevant information carefully and observe all the
warnings and note strictly.
The DMM as general measurement tool and widely used in the school,
laboratory, factory and other social field.
2. Safety note
Warning
To avoid possible electric shock or personal injury and to avoid possible damage
to the meter or to the equipment under test, adhere to the following rule:
 Do not apply more than the rated voltage, of marked on the
meter, between the input terminal and grounding terminal..
 Do not apply voltage between COM and OHM terminal, in the
resistance measuring state.
 Do not measure current with test lead inserted into voltage or
OHM terminal.
 Do not expose the instrument to the direct sun light, extreme
temperature and humidity or dew full.
 Inspect the test lead for damaged insulation or exposed metal.
 Before measuring current, check the Meter’s fuses and turn off